I'm worried and would like to fix it, but I want to understand the effects of what I'm doing. 2.4.18-smp up 386 days, 5:04 Dual AthlonMP 2000+ 2 GB ECC RAM Q.E.D. Buzz (buzz-piersol) wrote on 2008-02-13: #15 I am still using "sudo modprobe -r ehci_hcd" in order to use my USB flash drives. So what would be the result of a process, a process executed by anyone other than root, that attempts to write output to that file? weblink
Christopher M. Thanks. Comment 9 Adrian Bunk 2006-11-13 07:59:50 UTC Original submitter had a SiS 661 with kernel 2.6.16 (changed the subject). I also saw one of these messages when I turned on a new USB drive which was attached to the computer.
USB related updates were mentioned in BIOS release notes. Some USB ports didn't work (as if they didn't exist). That would make it easier to ask for support from HP. Comment 4 Len Brown 2006-04-25 10:09:32 UTC It is odd that this would appear in one realease and not another.
APIC, IIRC, is Advanced Programmable Interrupt Controller. Some of these may be machine-specific (e.g. I've just attached the player to a few different ports on my Compaq, with subtly different results in the logs, so I'm attaching them here. Can I capture that somewhere to help track this problem?Thanks,GS Top michaelnel Posts: 1478 Joined: 2006/05/29 16:50:11 Location: San Francisco, CA Kernel panic, APIC error, /dev/null error and other bad mojo
Any assistance on this error would be greatly appreciated, why it comes, what it means, how to troubleshoot it (without just passing noapic to the kernel). If this issue still exists in a supported series, please file a new bug. Hi there, i am kind of a newby and i have a clean install running of fedora core2. https://bugzilla.kernel.org/show_bug.cgi?id=9753 For more advanced trainees it can be a desktop reference, and a collection of the base knowledge needed to proceed with system and network administration.
If I check the device label using HAL before and after the post-upgrade it is always WD001, the device is not being changed, just the path to the mount point in Operation continuing on 1 devices and the ring buffer is full of these errors. None, the status of the bug is updated manually. This bug is specific to the SiS 661.
dmesg | grep 'APIC error' I'd be interested in hearing from you either way. http://grokbase.com/t/centos/centos/0669rj37mv/apic-error-on-cpu0-60-60 Until recently I operated with a single external USB disk in one of the ports, which works fine. LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware Kernel: APIC error on CPU - What to do? Also I have obviously kept 8.0b6 up to date with the latest patches.
User Name Remember Me? http://dukesoftwaresolutions.com/apic-error/apic-error-on-cpu1-0060.html In the BIOS I have disabled all hardware I don't need such as Firewire, USB3, Audio, Serial, Floppy etc.The reason behind trying Centos was if the problem existed there I would That "error writing . . . " message will not get appended to any system log file because it is just an error message resulting from the attempted redirection of the Everything used to work in 2.6.15-25-k7.
Since a couple of days I've been trying to recover data from my notebook HD and for that purpose I got an empty usb box but ubuntu would not see it. Visit the following links: Site Howto | Site FAQ | Sitemap | Register Now If you have any problems with the registration process or your account login, please contact us. You are currently viewing LQ as a guest. http://dukesoftwaresolutions.com/apic-error/apic-error-on-cpu1-6060.html DataTraveler 2.0 1GB Flash Drive Bus 005 Device 002: ID 0c45:62c0 Microdia Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus
janet: lloydh --- Quote ---Regarding the Issue 1 backup problems..... Later releases of SME8.x may have a newer kernel & drivers and therefore support your m/b features more fully. Note that there is probably a better way to make the new configuration take effect other the reinstalling the kernel.
EMU10k1 | +-08.1 Creative Labs SB Live! I have a toshiba laptop running 8.04 LTS 64 bit edition not only does my wifi not work but the 4 USB ports do not work with my thumb drive or Please visit this page to clear all LQ-related cookies. I've been having the error -110 problem in Ubuntu Jaunty when using a CoolerMaster Xcraft 360 caddy with a standard SATA drive in it.
Mark Stosberg (markstos) wrote on 2009-01-30: #41 I had a laptop that suddenly started to the exhibit the error "USB device not accepting address: error -110". CentOS The Community ENTerprise Operating System Skip to content Search Advanced search Quick links Unanswered posts Active topics Search The team FAQ Login Register Board index CentOS 5 CentOS 5 - Comment 23 Bill McGonigle 2009-04-09 02:38:56 UTC If anybody wants to work on this and needs hardware, send me an e-mail. this content Hope that helps.
Please let us know immediately if this newer 2.6.27 kernel resolves the bug reported here or if the issue remains. Also, please specifically note if the issue does or does not appear in the 2.6.26 kernel. Edit bug mail Other bug subscribers Subscribe someone else Bug attachments sudo dmesg > /home/gustavo/dmesg.txt (edit) dmesg_dell_inspiron_5100.txt (edit) dmesg.log (edit) dmesg.log (edit) lspci-vvnn.log (edit) uname, version signature, lsusb, dmesg (edit) dmesg.out There are one of two ways you should be able to test: 1) If you are comfortable installing packages on your own, the linux-image-2.6.27-* package is currently available for you to
In the kernel log the errors appear right after boot with the new kernel: Sep 11 19:36:56 rei1 kernel: Linux version 2.6.9-42.0.2.EL (email@example.com) (gcc version 3.4.6 2 0060404 (Red Hat 3.4.6-3)) Comment 17 Miha 2008-06-05 00:18:46 UTC (In reply to comment #16) > >APIC error 40. However toracat knows about it and, having been watching "over my shoulder", has posted the advice regarding the workaround.Also, the "error writing to /dev/null" isn't in /var/log/messages or in dmesg either. This book contains many real life examples derived from the author's experience as a Linux system and network administrator, trainer and consultant.
RTL-8139/8139C/8139C+ (rev 10) 02:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. Thank you all for involving and for suggestions! Note that registered members see fewer ads, and ContentLink is completely disabled once you log in. I just put it down to the fact that: - Celerons were not specifieded to be dual processors (but lots of folks did run them this way) - Celerons were on
Andres Mujica (andres.mujica) on 2009-07-11 Changed in linux-source-2.6.15 (Ubuntu): status: New → Won't Fix zizo_halo (zizo-halo) wrote on 2009-07-22: #46 this is what i get when i try to boot the And one other thing I can hear the disk clicking or something like that. I'm not too familiar with GRUB (I usually use LILO), but it should tell you a key to press to edit the kernel boot parameters before it times out - might If I boot into Ubuntu and try to mount the drive, I can't.
The error is detected in the APIC internally. I've had the issue on the HP since Karmic -- Intrepid and Jaunty worked OK, so I consider this a regression on that machine. But with others LiveCD-s the laptop just shutdowns. Sort results of a query by the order of OR clause Is there a way to make a metal sword resistant to lava?
I've tried different cables with the same problem and it happens on any port. Alpha5 is set to be released Thursday Sept 4. IO-APIC-edge vs. kernel .config > 2.